| 额定容量 |
±500 N･m~±5 kN･m |
| 超负载允许值 |
120 %R.C. |
| 超负载界限 |
200 %R.C. |
| 额定输出 |
1.3 mV/V±0.26 mV/V |
| 精度的检测价值 |
±0.2 %R.O. (In case of combination with Minebea’s Transmitter CSA?561) (Linearity, hysteresis and repeatablity are included.) |
| 推荐附加电压 |
4 VAC |
| 绝缘电阻 |
500 M-ohm or more (DC50 V)(between bridge and main body) |
| 温度工作范围 |
0 ℃ ~ 90 ℃ |
| 零点的温度影响 |
0.1 %R.O./10 ℃ |
| 输出的温度影响 |
0.1 %LOAD/10 ℃ |
| 最大转速 |
TMNR-500NME~2KNME : 10 000 rpm
TMNR-3KNME : 8 000 rpm
TMNR-5KNME : 6 000 rpm
(Maximum rotation is 3 000 rpm for the grease lubrication) |
| 零点漂移的旋转 |
0.2 %R.O. |
| 温度上升旋转 |
40 ℃ or less / at the maximum rotation(At the grease lubrication)
Double bearing side 60 ℃, Single bearing side 40 ℃ or less
／at the maximum rotation (At the droping llubrication) |
| 电缆 |
φ10, 4 -cores shielded cable (model : CAC-160-※M）
with the connector at the both ends.
(Cable is specified from 10 m, 20 m or 30 m) |
| 连接器型号. |
TC1108-12A10-7M10.0
PRC03-12A10-7M10.5 |
| 保护等级 |
IP40 |
| 齿轮为旋转探测器 |
S45C black coated
TMNR-500NME ~ 3KNME :
60-tooth, module 1, tooth width 10 mm
TMNR-5KNME :
120-tooth, module 1, tooth width 10 mm |